The risk of enteropathogens to food and water is highly dependent on their survival in soil environments. Here, the effects of soil type, particle size, the presence of natural organic matter (NOM) or Fe/Al (hydro)oxides on pathogenic Escherichia coli O157:H7 survival in sterilized soil particles were assessed through survival, attachment, metabolic activity, and qRT-PCR analyses. The abundance of inoculated E. coli O157:H7 in Brown soil (Alfisol) particles increased 0.6–1.4 log10 CFU/g within 3 days (except for NOM-stripped clay), while that in Red soil (Ultisol) particles decreased rapidly in 8 days post-inoculation. Additionally, survival of bacteria was significantly enhanced when Fe/Al (hydro)oxides had been removed from Red soil particles. For the two soils, E. coli O157:H7 survived the longest in NOM-present clays and the bacterial adenosine 5′-triphosphate (ATP) levels were 0.7–2.0 times greater in clays than in sands and silts on day 8. Moreover, clays were more effective than silts and sands in binding cells and changing the expressions of acetate pathway-associated genes (pta and ackA). For silts and sands, E. coli O157:H7 decayed more rapidly in the presence of NOM and similar trends of bacterial ATP levels were observed between NOM-stripped and NOM-present soil particles, indicating that the primary role of NOM was not as a nutrient supply. These findings indicate that soil particles function mainly through attachment to change the metabolic pathway of E. coli O157:H7 and ultimately impact the survival of bacterial pathogens in soils.

•Fullerene/C3N4 hybrid was synthesized by a hydrothermal method.•C70/C3N4 exhibited the best bactericidal efficiency.•Fullerenes provided the effective transfer of the photoinduced electrons.Interest has grown in developing safe and high-performance photocatalysts based on metal-free materials for disinfection of bacterial pathogens under visible light irradiation. In this paper, the C60/C3N4 and C70/C3N4 hybrids were synthesized by a hydrothermal method, and characterized by X-ray diffraction (XRD), UV-vis diffuse reflection spectroscopy (UV–vis DRS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high revolution transmission electron microscope (HRTEM). The performance of photocatalytic disinfection was investigated by the inactivation of Escherichia coli O157:H7. Both C60/C3N4 and C70/C3N4 hybrids showed similar crystalline structure and morphology with C3N4; however, the two composites exhibited stronger bacterial inactivation than C3N4. In particular, C70/C3N4 showed the highest bactericidal efficiency and was detrimental to all E. coli O157:H7 in 4 h irradiation. Compared to C3N4, the enhancement of photocatalytic activity of composites could be attributed to the effective transfer of the photoinduced electrons under visible light irradiation. Owing to the excellent performance of fullerenes (C60, C70)/C3N4 composites, a visible light response and environmental friendly photocatalysts for disinfection were achieved.Download full-size image

•Colloidal stability as influenced by EPS and environmental conditions were studied.•Adsorption and aggregation were found to be dependent on the solution chemistry.•The mass fraction of EPS on TiO2 decreased with increased pH and NaCl concentration.•EPS promoted the aggregation of TiO2 only when TiO2 were positively charged.•Increased stability of TiO2 showed steric effect occurred after the addition of EPS.Increased use of commercial titanium dioxide nanoparticles (TiO2 NPs) in consumer products most likely leads to their additional environmental release. Aggregation and disaggregation processes are expected to play an important role in the fate and transport of TiO2 NPs in natural aquatic ecosystems. Therefore, in this work, we have studied the colloidal stability of TiO2 NPs in the presence of extracellular polymeric substances (EPS) from Bacillus subtilis and the adsorption behavior of EPS on TiO2 NPs in aqueous solutions at different pH values and ionic strengths (IS). The adsorption and aggregation processes were found to depend on the solution chemistry. The mass fraction of EPS on TiO2 NPs decreased with increased pH and NaCl concentrations, which was verified by Fourier transform infrared spectroscopy. The presence of EPS can substantially influence the colloidal stability of TiO2 NPs. In deionized water, the aggregation of NPs was induced by the addition of EPS only when the pH was below the TiO2 NP point of zero charge (≈6). When the pH was equal to pHPZC, TiO2, the TiO2 NPs would rapidly form large aggregates, but the adsorption of EPS leads to partial fragmentation via electrostatic repulsion and steric hindrance. When the pH was greater than pHPZC, TiO2, the aggregation rate was minimally affected by the increased EPS concentration. In NaCl solution, the aggregation rate of TiO2 NPs obviously increased with increased NaCl concentration. The critical coagulation concentration (CCC) of TiO2 NPs is 13.9 mM in the absence of EPS and increases to 155.6, 213.7 and 316.4 mM in the presence of 1, 5 and 10 mg/L EPS in NaCl solution, respectively, which indicates that the steric hindrance occurs after the addition of EPS. This study suggests that environmental conditions and EPS concentration greatly modify the colloidal stability of TiO2 nanoparticles.Download high-res image (418KB)Download full-size image

•The amount of EPS-C, -N and -P adsorption on minerals varied with pH values.•The chemical adsorption results corresponded well with the classic DLVO theory.•Proteins were distributed on clay minerals while nucleic acids on goethite.•The adsorption process in all the mineral systems was exothermic and altered by pH.The adsorption of extracellular polymeric substances (EPS) from Pseudomonas putida on montmorillonite, kaolinite and goethite was investigated as a function of pH using batch studies coupled with confocal laser scanning microscopy (CLSM) and isothermal titration calorimetry (ITC). Characterization by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy showed that the extracted EPS contained carboxyl, phosphoryl, amino, and hydroxyl on functional groups as well as polysaccharides, protein and nucleic acid on components. The mass fraction of EPS adsorption on minerals decreased with the final pH increased from 3.0 to 9.0. The mass fraction of EPS-N adsorption varied with pH values and was higher than that of EPS-C or EPS-P on montmorillonite and kaolinite, while the mass fraction of EPS-P adsorption was the highest on goethite. CLSM results further demonstrated that proteins were predominantly distributed on the montmorillonite and kaolinite surfaces, while nucleic acids were mainly on the goethite surface. ITC results revealed that the adsorption process in all mineral systems was exothermic, and pH altered the heat effect of EPS-mineral reactions. The data obtained in this study would facilitate a better understanding of the adsorption mechanisms of EPS on minerals.

•Infrared absorption peaks of intact and LB-EPS free cells were identical.•The total acidic functional group concentrations of intact bacteria were higher.•Some cell surface functional groups were exposed after LB-EPS removal.•Electrophoretic mobilities of intact and treated cells showed no differences.•Four LB-EPS free bacteria exhibited smaller hydrophobicities than intact cells.This study investigated the effect of loosely bound extracellular polymeric substances (LB-EPS) on the comprehensive surface properties of four bacteria (Bacillus subtilis, Streptococcus suis, Escherichia coli and Pseudomonas putida). The removal of LB-EPS from bacterial surfaces by high-speed centrifugation (12,000 × g) was confirmed by SEM images. Viability tests showed that the percentages of viable cells ranged from 95.9% to 98.0%, and no significant difference was found after treatment (P > 0.05). FTIR spectra revealed the presence of phosphodiester, carboxylic, phosphate, and amino functional groups on bacteria surfaces, and the removal of LB-EPS did not alter the types of cell surface functional groups. Potentiometric titration results suggested the total site concentrations on the intact bacteria were higher than those on LB-EPS free bacteria. Most of the acidity constants (pKa) were almost identical, except the increased pKa values of phosphodiester groups on LB-EPS free S. suis and E. coli surfaces. The electrophoretic mobilities and hydrodynamic diameters of the intact and LB-EPS free bacteria were statistically unchanged (P > 0.05), indicating LB-EPS had no influence on the net surface charges and size distribution of bacteria. However, LB-ESP could enhance cell aggregation processes. The four LB-EPS free bacteria all exhibited fewer hydrophobicity values (26.1–65.0%) as compared to the intact cells (47.4–69.3%), suggesting the removal of uncharged nonpolar compounds (e.g., carbohydrates) in LB-EPS. These findings improve our understanding of the changes in cell surface characterizations induced by LB-EPS, and have important implications for assessing the role of LB-EPS in bacterial adhesion and transport behaviors.

The adsorption of extracellular polymeric substances (EPS) from Bacillus subtilis on montmorillonite, kaolinite and goethite was investigated as a function of pH and ionic strength using batch studies coupled with Fourier transform infrared (FTIR) spectroscopy. The adsorption isotherms of EPS on minerals conformed to the Langmuir equation. The amount of EPS-C and -N adsorbed followed the sequence of montmorillonite > goethite > kaolinite. However, EPS-P adsorption was in the order of goethite > montmorillonite > kaolinite. A marked decrease in the mass fraction of EPS adsorption on minerals was observed with the increase of final pH from 3.1 to 8.3. Calcium ion was more efficient than sodium ion in promoting EPS adsorption on minerals. At various pH values and ionic strength, the mass fraction of EPS-N was higher than those of EPS-C and -P on montmorillonite and kaolinite, while the mass fraction of EPS-P was the highest on goethite. These results suggest that proteinaceous constituents were adsorbed preferentially on montmorillonite and kaolinite, and phosphorylated macromolecules were absorbed preferentially on goethite. Adsorption of EPS on clay minerals resulted in obvious shifts of infrared absorption bands of adsorbed water molecules, showing the importance of hydrogen bonding in EPS adsorption. The highest K values in equilibrium adsorption and FTIR are consistent with ligand exchange of EPS phosphate groups for goethite surface. The information obtained is of fundamental significance for understanding interfacial reactions between microorganisms and minerals.Graphical abstractResearch highlights▶ EPS-N moieties mainly from proteins are adsorbed preferentially on clay minerals. ▶ EPS-P moieties predominantly from nucleic acids are adsorbed preferentially on goethite. ▶ Hydrogen bonding and the electrostatic interaction are the main forces governing the adsorption of EPS on clay minerals. ▶ Chemical bonding interactions (ligand exchange) contribute to selective fractionation of EPS adsorption on goethite.