Co-reporter:Sen Du, Luyan Wang, Ni Xue, Meishan Pei, Weiping Sui, Wenjuan Guo
Journal of Solid State Chemistry 2017 Volume 252(Volume 252) pp:
Publication Date(Web):1 August 2017
DOI:10.1016/j.jssc.2017.04.034
•The composite material is covalently bonded and stable.•Each repeating unit of polyethyleneimine has a plurality of adsorption sites.•Bent-GLYMO-PEI has a faster adsorption rate and a higher adsorption capacity for amino black 10B.The modified bentonite with a graft amount of 30% was prepared by polyethylenimine reacting with the epoxy bonds on the molecular of (3-Glycidyloxypropyl) trimethoxysilane and being grafted on the bentonite to remove amino black10B. The effects of pH, time, temperature and concentration on the adsorption capacity were studied. As the pH value increases from 3 to 10, the adsorption capacity decreased from 264.5 to 140.4 mg/g. The adsorption process reached equilibrium at 90 min when pH=3. The adsorption kinetics indicates that the adsorption process was very fast and in accordance with the secondary adsorption kinetics. The data about thermodynamic equilibrium was consistent with the Langmuir model. The adsorption process mainly depended on electrostatic attraction and hydrogen bonding and the adsorption data of Bent-PGLYMO-PEI showed that the maximum adsorption capacity reached 327.7 mg/g.Bent-PGLYMO-PEI has been synthesized and exhibited a high adsorption capacity on amino black 10B due to electrostatic interaction between polyethyleneimine and amino black 10B.Download high-res image (97KB)Download full-size image
Co-reporter:Ting Wu, Lu Yan Wang, Sen Du, Wen Juan Guo and Mei Shan Pei
RSC Advances 2015 vol. 5(Issue 85) pp:69067-69074
Publication Date(Web):06 Aug 2015
DOI:10.1039/C5RA11363F
Polyaniline (PANI) micro/nanostructures are synthesized by electrochemical polymerization, and characterized by field-emission scanning electron microscopy, Fourier transform infrared spectroscopy and UV-visible spectroscopy. It is revealed that the PANI microwires are produced with high yield with diameters of about 2 μm and lengths of several hundreds of micrometers, while nanostructures in the presence of PAA have diameters of about 500 nm. The micro/nanostructured PANI films are very stable and show high electrocatalytic reduction toward H2O2, which makes it an ideal substrate for H2O2 detection and offers great promise for biosensing applications.
Co-reporter:Ting Wu, Luyan Wang, Yue Zhang, Sen Du, Wenjuan Guo and Meishan Pei
RSC Advances 2015 vol. 5(Issue 22) pp:16684-16690
Publication Date(Web):29 Jan 2015
DOI:10.1039/C4RA17078D
Poly(3-thiophene acetic acid) (PTAA) nanowires are synthesized in a high yield by electrochemical polymerization, with diameters of about 200 nm and lengths of tens of micrometres. In the reaction systems, the water soluble macromolecules hydroxyethylcellulose (HEC), chitosan (Cs) and polyacrylamide (PAM) are added respectively as templates through a dip-coating process, where the macromolecules are spread on an indium tin oxide glass which is used as the working electrode. However, when polyethylene glycol (PEG) is used, only a PTAA film can be obtained. Therefore the interactions between template macromolecules and TAA monomers play a key role in the formation of PTAA nanowires and the dip-coating process presents an effective way to produce 1D conductive polymer materials with controllable shape. The optical, electrochemical and surface properties are also studied respectively to compare the performances of PTAA film and nanowires, where the latter indicates good electrochemical responsiveness and evidently increased hydrophobicity.
Co-reporter:Luyan Wang;Xinzhou Wu;Meishan Pei;Zhiyan Wu;Xiaonan Li;Xutang Tao
Chinese Journal of Chemistry 2011 Volume 29( Issue 1) pp:185-190
Publication Date(Web):
DOI:10.1002/cjoc.201190049
Abstract
Facile synthesis of multi-branched gold nanostructures by using the tetrabutyl ammonium bromide (TBAB) as a capping agent is described. The reaction is carried out in a one-step process at mild temperature. Gold nanostructures with more than six sharp branches ranging from 70 to 130 nm in length are synthesized in high yield. It is proposed that the relative weak adsorption capacity of TBAB leads to the incompletely covered gold surface and the growth of nanoparticles occurs on the uncovered gold surface, and therefore short branches appear consequently. Then positively charged TBAB layers on the gold surfaces prevent the branches from aggregating with each other which stimulates the branch growth. The prepared branched gold nanoparticles show efficient surface-enhanced Raman scattering (SERS) properties. Low temperature (4°C) is unfavorable to the formation of multi-branched gold nanostructures, and only thin small irregular plate-like nanoparticles are produced. The addition of SDS in TBAB aqueous solution results in forming SDS micelles at much lower concentration of SDS (0.4 mmol/L) as compared to that in pure water, and short branched gold nanoparticles are obtained in the SDS-TBAB system.
Co-reporter:Luyan Wang, Xinzhou Wu, Xiaonan Li, Li Wang, Meishan Pei and Xutang Tao
Chemical Communications 2010 vol. 46(Issue 44) pp:8422-8423
Publication Date(Web):11 Oct 2010
DOI:10.1039/C0CC03810E
Concave gold nanoplates are obtained in hexagonal liquid crystal (LLC) made of SDS (sodium dodecyl sulfate)/glycine/HAuCl4 aqueous solution system where glycine plays the key role. All plates are single-crystals, characterized by {111} facets, with concave centers of regular hexagonal or triangular shapes, and with better electrocatalytic activity than gold nanoplates.
Co-reporter:Luyan Wang;Zhiyan Wu;Meishan Pei;Xinzhou Wu;Xutang Tao
Chinese Journal of Chemistry 2010 Volume 28( Issue 7) pp:1069-1075
Publication Date(Web):
DOI:10.1002/cjoc.201090187
Abstract
Phase behavior of ternary system involving surfactant-like ionic liquid 1-dodecyl-3-methylimidazolium chloride ([C12mim]Cl), water, and nonionic surfactant PEO-PPO-PEO block copolymer (Pluronic L64) is investigated at 25°C. Hexagonal (H1) and lamellar liquid crystal phase (Lα) are found in [C12mim]Cl/H2O/L64 system by using polarized optical microscopy (POM), small-angle X-ray scattering (SAXS) techniques and 2H NMR spectra. The phase structure (H1 phase), which is formed in [C12mim]Cl/H2O binary system, is not changed when L64 with a low concentration is added. However, phase transitions will occur from hexagonal to multiphases of H1 and cubic phases (C), then to Lα+C phases with constant [C12mim]Cl/H2O ratio and increasing L64 concentration. Moreover, at given L64 (5%, 20%) concentration, the lattice parameter of H1 or Lα phase decreases with increasing [C12mim]Cl/H2O ratio. Fourier transform infrared (FTIR) spectra indicate that the H-bonded network comprising an imidazolium ring, chloride ion and water formed in [C12mim]Cl/H2O binary system is disrupted upon addition of L64. This is helpful to the phase transition, due to the decreasing of interfacial curvature induced by dehydration of hydrated layer after the addition of PEO block of L64.
Co-reporter:Luyan Wang, Xinzhou Wu, Xiaonan Li, Li Wang, Meishan Pei and Xutang Tao
Chemical Communications 2010 - vol. 46(Issue 44) pp:NaN8423-8423
Publication Date(Web):2010/10/11
DOI:10.1039/C0CC03810E
Concave gold nanoplates are obtained in hexagonal liquid crystal (LLC) made of SDS (sodium dodecyl sulfate)/glycine/HAuCl4 aqueous solution system where glycine plays the key role. All plates are single-crystals, characterized by {111} facets, with concave centers of regular hexagonal or triangular shapes, and with better electrocatalytic activity than gold nanoplates.