Fiber hybrid polyimide-based (PI-based) composites reinforced with carbon fiber (CF) and poly-p-phenylene benzobisthiazole (PBO) fiber of different volume fractions were fabricated by means of hot press molding technique, and their mechanical properties and tribological behaviors under sea water lubrication were systematically investigated in relation to the synergism of CF and PBO fiber. Results showed that the incorporation of CF or PBO fiber improved the tensile strength, hardness, and wear resistance of PI. More importantly, because of the synergistic enhancement effect between CF and PBO fiber on PI matrix, the combination of 10%CF and 5%PBO fiber reinforced PI-based composite had the best mechanical and tribological properties, showing promising application in ocean environment. POLYM. COMPOS., 37:1650–1658, 2016. © 2014 Society of Plastics Engineers

In this paper, Ti₃AC₂ (A = Al, Si) were prepared by pressureless argon shielding synthesis technique. The microstructure and phase transformation of as-prepared Ti₃AC₂ (A = Al, Si) in hydrothermal hydrofluoric acid (HF) solution were investigated systematically. Results showed that the obtained Ti₃AlC₂ and Ti₃SiC₂ were closely aligned layered structure. In hydrothermal HF solution, Al or Si element was preferentially etched from the layered structure, inducing obvious transformation of microstructure and phase composition. For Ti₃AlC₂, Al atoms diffused out of the structure and reacted with HF to form AlF₃•H₂O, which induced the rearrangement of the Ti and C atoms, and finally resulted in the formation of TiC_x cubic phase. With the hydrothermal temperature and reaction time increasing, the TiC_x phase gradually disappeared and the grain size of AlF₃•H₂O gradually increased. When Ti₃SiC₂ was immersed in hydrothermal HF solution, the main products were TiC and SiC. Interestingly, with the hydrothermal treatment temperature and reaction time increasing, TiC gradually disappeared, while SiC nearly kept unchanged. This can be explained that SiC was covalently bonded carbide, while TiC was metallically bonded, having relatively weak bond energy and consequently being unstable in hydrothermal HF solution.