Formation mechanism and optical properties of InAs quantum dots (QDs) on the surface of GaAs nanowires (NWs) were investigated. This NW-QDs hybrid structure was fabricated by Au-catalyzed metal organic chemical vapor deposition. We found that the formation and distribution of QDs were strongly influenced by the deposition time of InAs as well as the diameter of GaAs NWs. A model based on the adatom diffusion mechanism was proposed to describe the evolution process of the QDs. Photoluminescence emission from the InAs QDs with a peak wavelength of 940 nm was observed at room temperature. The structure also exhibits a decoupling feature that QDs act as gain medium, while NW acts as Fabry–Perot cavity. This hybrid structure could serve as an important element in high-performance NW-based optoelectronic devices, such as near-infrared lasers, optical detectors, and solar cells.

InAs quantum dots (QDs) are grown epitaxially on Au-catalyst-grown GaAs nanowires (NWs) by metal organic chemical vapor deposition (MOCVD). These QDs are about 10–30 nm in diameter and several nanometers high, formed on the {112} side facets of the GaAs NWs. The QDs are very dense at the base of the NW and gradually sparser toward the top until disappearing at a distance of about 2 μm from the base. It can be concluded that these QDs are formed by adatom diffusion from the substrate as well as the sidewalls of the NWs. The critical diameter of the GaAs NW that is enough to form InAs QDs is between 120 and 160 nm according to incomplete statistics. We also find that these QDs exhibit zinc blende (ZB) structure that is consistent with that of the GaAs NW and their edges are faceted along particular surfaces. This hybrid structure may pave the way for the development of future nanowire-based optoelectronic devices.

Vertical GaAs nanowires on Si (111) substrate were grown by metal organic chemical vapor deposition via Au-catalyst vapor−liquid−solid mechanism. Stacking-faults-free zinc blende nanowires were realized by using AlGaAs/GaAs buffer layers and growing under the optimized conditions, that the alloy droplet act as a catalyst rather than an adatom collector and its size and composition would keep stable during growth. The stable droplet contributes to the growth of stacking-faults-free nanowires. Moreover, by using the buffer layers, epitaxial growth of well-aligned NWs was not limited by the misfit strain induced critical diameter, and the unintentional doping of the GaAs nanowires with Si was reduced.

In this paper, an experiment on tunable resonant cavity enhanced (RCE) photodetector with external cavity is reported. It is the first time to realize a tunable RCE photodetector in China. A tuning range about 10 nm has been obtained and further extension is expected. Corresponding theoretical analysis and discussions are presented.